On paper, a project for pumping might appear straightforward. Water needs to be pumped from one location to the next. However there are a myriad of factors which can influence the distance between two locations including elevation and flow rate solids, pressure storage capacity, and access for maintenance.
Image credit: romtecutilities.com
For Romtec Utilities, designing a pump station begins by defining those operating conditions rather than selecting equipment from a standard catalog. The requirements for the project can be used to create initial designs and budgetary figures.
Start With One Question How are We Moving?
The engineering changes immediately.
Domestic sewage may contain solids and show significant variations in the daily flow. The wastewater lift station is necessary when gravity conveyance is not or is not working. Engineers must therefore consider the expected inflow, peak conditions and pumping capacities, wet well behavior, discharge requirements and how the equipment will be operated and maintained.
Industrial water presents different challenges. The water used in a manufacturing or processing facility might need to be caustic, oily or heated at high temperatures or pressure. Romtec Utilities designs systems for industrial applications that range from food processing and power generation, data centers, pharmaceutical waste and gasoline and oil-based facilities.
Rainfall could create a completely distinct operating cycle
Stormwater systems tend to be unoccupied for long periods of time and then suddenly confront the possibility of a huge volume in the course of a storm.
A stormwater lift station associated with a detention reservoir, for instance, should work with the site’s larger drainage strategy. When the basin fills up and storage in temporary mode controls the immediate volume and a pumping system then moves collected water toward an approved discharge point.
Romtec Utilities provided this solution for the development of an Norco business park in California. The plan called for a pumping station to empty the detention system of the public stormwater drainage system. The station was intended to work as part of a development’s drainage system and not as a separate piece of equipment.
The phrase “package” does not have to be used to mean off-the-shelf
There is a common misconception that a system of pumping packages is merely a predetermined array of components.
For engineered infrastructure, packaging could also mean coordinating the most important pieces of equipment into a project-specific system. Meters, pumps, valves control, communications, structural components, and other equipment can be arranged according to the requirements of the duty conditions.
It is especially useful in connecting a brand new system with an existing infrastructure. In municipal and industrial buildings, there’s usually unlimited space available or a complete clean environment for the installation. Equipment may need to be adapted around existing piping systems, structures or electrical systems as well as operating schedules.
The real effects of capacity Planning
As facilities expand over the years, undersizing can be very costly.
At Portland International Airport, Romtec Utilities provided the sewer interceptor station for the PDX Next expansion. The new station was designed to increase the capacity at peak flows of the current system as airport facilities grow.
This is a key aspect of engineering: construction conditions must not just reflect what an installation handles during a typical afternoon. Engineers must know what happens during peak demand.
The Job isn’t Complete When the Equipment is delivered
At time, drawings and calculations need to evolve into an operational system. Coordination of installation and documentation are crucial to the long-term success of.
A properly engineered pumping system is ultimately defined by what happens years after the construction. When flows increase or a major storm occurs or equipment needs maintenance the choices made during preliminary design are evident.
Romtec Utilities blends these choices to provide a complete pumping solution for a particular project. It assists in transforming equipment into infrastructure that is made specifically for the environment where it is utilized.
